Advertiser Disclosure

How to Get Blood Out of Carpet With Everyday Items 

Woman cleans and scrubs her carpet.
Syda Productions / Shutterstock

Many of us have been there: You accidentally bump into a glass vase in your living room, leaving it in a million pieces all over the floor. While cleaning it up, you cut your hand on a shard of glass, leaving a trail of blood on your carpet. After getting over the initial pain of the cut, you’ll probably focus your attention on the next pain point — the bloodstain on your carpet. Thankfully, your living room carpet isn’t permanently ruined — there are several ways to remove blood from carpet. And the best part? The products you need to remove the stain are probably in your bathroom or kitchen pantry. Read on to learn how to get blood out of carpet.

7 Ways to Get Blood Out of Carpet

While it’s very possible to get blood out of carpet after it’s been sitting for several hours or days, it’s best to remove blood from carpet when it’s still wet. If that’s not possible, you can still remove dried blood from carpet, even after it binds to the carpet fibers. There are various methods you can follow, but when removing dried blood, it’s best to first gently rub the stain with a steel brush to break up the deposit. Also, blotting with a cotton cloth (as opposed to rubbing) keeps you from spreading the stain further.

family hanging photo logo

Get home decor deals instantly!

Get connected to the home improvement coupons and promo codes you’ve been waiting for.

Option 1: Use cold water to remove wet blood

  • Step 1: Fill a spray bottle with cold water. Spray the wet blood area repeatedly.
  • Step 2: Dab it dry using a cotton towel. Be sure to blot the affected area, rather than rub it.
  • Step 3: Repeat these steps until the wet blood disappears. Allow it to air dry or use a wet vac to dry the area.

Option 2: Use a salt paste to remove dried blood

  • Step 1: Pour cold water into a bowl. Add in enough salt to create a thin paste.
  • Step 2: Apply the mixture to the bloodstain. Allow it to sit for about five minutes.
  • Step 3: Blot the stain with a cotton towel or rag until it’s gone. Avoid rubbing the area as that may make the stain spread.

Option 3: Use dish soap to remove dried blood

  • Step 1: For wool carpet, mix 1 tablespoon of dish soap with 2 cups of cold water. Place the solution on the stain.
  • Step 2: Blot the bloodstain with a damp cotton cloth. Repeat until the stain disappears.
  • Step 3: Sponge the spot with cold water. Blot it dry with a dry cotton cloth.

Option 4: Use ammonia to remove dried blood

  • Step 1: Combine 1 tablespoon of ammonia with half a cup of warm water. Put the solution on a sponge.
  • Step 2: Blot the stain until the liquid absorbs into the sponge.
  • Step 3: Use the sponge to apply cold water. Blot it dry with a cotton towel.

Option 5: Use hydrogen peroxide to remove dried blood

Important note: Hydrogen peroxide may change the color of some carpets, so it’s important that you test a hidden area first to see how the carpet reacts.

  • Step 1: To test the area, take a small amount of hydrogen peroxide and apply it to a hidden area of your carpet.
  • Step 2: Wait a few minutes and then check the carpet color. If it doesn’t affect the carpet’s color, apply it to the bloodstain.
  • Step 3: To remove the dried blood, dip a cotton swab into the hydrogen peroxide. Apply it to the stain until it disappears.
  • Step 4: After letting it soak for about an hour, take a wet washcloth and rinse the area. Then allow it to air dry.

Option 6: Use water and ammonia to remove dried blood

  • Step 1: For synthetic fiber carpets, mix 2 tablespoons of ammonia with a full glass of water (about 8 ounces). Apply the ammonia and water solution to the stain.
  • Step 2: Allow it to sit for about five minutes. Then use a clean, damp cotton towel to blot the area until the bloodstain comes out. It’s not advisable to use this method on wool carpets, as that can damage the fabric.

Option 7: Use water, baking soda, and white vinegar to remove dried blood

  • Step 1: Combine 2 cups of warm water, 2 cups of white vinegar, and 4 tablespoons of baking soda in a bowl or spray bottle.
  • Step 2: Apply the mixture to the affected area. Let it sit for five minutes.
  • Step 3: Blot the carpet dry with a clean, damp cotton cloth. Allow it to air dry.

Products you’ll need to get blood out of carpet

  • Steel brush: The tough bristles on a steel brush help break up the bloodstain from the carpet fibers
  • Spray bottle: A spray bottle helps you apply the mixture directly to the affected area
  • Sponge: A sponge is necessary to blot the area after applying the removal mixture
  • Rag: A damp rag is for dabbing the area clean
  • Wet vac: A wet vac soaks up the mixture used to remove the blood

The bottom line

Here’s the good news about getting blood out of carpet: You can easily remove most bloodstains (wet or dry) using products that may be in your bathroom or kitchen. If all methods mentioned above don’t get blood out of carpet, it may be necessary to consult a professional carpet cleaner.

Frequently Asked Questions

Will OxiClean remove blood stains from carpet?

Yes. If you prefer a specialty cleaner rather than making your own solution at home, OxiClean Versatile Stain Remover and OxiClean Carpet & Area Rug Stain Remover Spray are both solutions with sodium percarbonate that can get bloodstains out of carpet.

How does vinegar remove blood from carpet?

Vinegar is effective in removing bloodstains from carpet due to its high acidity and antimicrobial and antibacterial properties. To use vinegar to remove blood from carpet, apply a mixture of 1 cup of vinegar and 2 cups of warm water to the stain. Repeat this process once, blot clean with a cotton cloth, and then allow it to air dry.

Can professional carpet cleaners remove bloodstains?

Most professional carpet cleaners specialize in removing stubborn stains such as blood, nail polish, coffee, makeup, berries, and more. Prior to hiring a professional carpet cleaner, it’s advisable to describe your carpet cleaning needs in detail to ensure they have the equipment and cleaning solution necessary to remove the stain.

Does cornstarch remove blood from carpet?

Yes. Cornstarch mixed with water to create a paste works similarly to the salt paste method. After the paste dries up, rub it off the carpet with a toothbrush.

Can you use warm water to get blood out of carpet?

No. When a removal method calls for water as a component, in most cases, the water must be cold. Warm water can actually cause the bloodstain to set in instead of helping to remove it.

Related Articles

How to Get Slime Out of Carpet

Every child loves slime, but as soon as that colorful concoction gets into the carpet it can become a parent’s worst nightmare. Thankfully, slime time doesn’t have to ruin your carpet or rugs if they fall victim to the goo. We’ve provided a simple step-by-step guide on how to remove slime from carpet and rugs to save you the added stress.

Read More

The Best Carpet Cleaners to Buy in 2021

Carpets and rugs are always in use at home, so they collect and hold the majority of dirt and debris that come with daily life. (Not to mention, pets love to test out carpets and rugs when potty training.) Regular vacuum cleaners are great for dirt and some hair, but stains associated with children and […]

Read More

Do You Really Need a Furnace Humidifier?

Humidifiers are a common appliance to keep homes comfortable, especially in winter when the air can be very dry. Portable humidifiers run in specific areas of the home, such as bedrooms, while furnace humidifiers are installed with the HVAC system to distribute moisture throughout the house.  Whether you need one depends on the conditions of […]

Read More